Uncategorized

FUTV-9451 100watt TV Transmitter DVB-T Digital Transmitter (Indoor)

FUTV-9451 100watt TV Transmitter DVB-T Digital Transmitter (Indoor)

R: V20151109-17-11 Data sheet

 

Outline

FUTV-9451 is a professional DVB-T digital transmitter researched and developed by FMUSER, which gives sustained power output. Its compact structure design has greatly saved space for your room. It is applicable to both SFN and MFN network modes and supports both signal-carrier mode and multi carrier-mode. Signal channel and broadband transmission are supported.
The frequency range of FUTV-9451  is from 470MHz~806MHz. This transmitter has a very high linear and high reliability as it takes high gain and high linear LDMOS tube amplifier module. Furthermore, it supports AGC function to keep sustained power output.
FUTV-8362 DVB-T digital transmitter can be widely used in HD/SD digital TV signal transmitting and broadcasting system.

 

 

Key Features
·Enhanced signal transmission quality
·Intelligent and modularized amplifier unit, takes high power gain and high linear LDMOS tube amplifier module design
·Low power consumption and super linear design to improve the transmission power, and reduce the nonlinear distortion
·Support AGC function with sustained power output to allow the transmitter a good stability and reliability
·LED on the front panel support alarm and signal monitor
·Stabilized-power supply with wide range of voltage and high efficiency
·Multi lightning protection measures, good protection for whole equipment.
·24-hour working unmanned, user friendly design
·Support fault self-diagnosis
·Support MFN and SFN system
·Easy to install, elegant appearance

Monitoring Objects and Alarm Status

Monitoring Objects

Alarm Status

Power Supply

abnormal

Overheating

alert

Amplifier

abnormal

Antenna feed system

abnormal

 

 

Technical Specifications
Phase noise

Center frequency deviation (Hz)

Local oscillator (dBc/Hz)

at10

≤ – 70

at100

≤ – 85

at1k

≤ – 95

at10 k

≤ – 100

at100 k

≤ – 111

at1 M

≤ – 125

Electrical Parameters

Item

Technical specs

Basic Parameters

TV Standard

DTMB-T /DVB-T/DVB-C

Modulating mode

4/16/32/64 QAM

Frequency stability

(3 months)

External Frequency Range: ≤10-10

Internal Frequency Range: ≤10-7

Frequency accuracy

MFN: ±100Hz  /  SFN: ±1Hz

Local oscillator phase noise

See table above

In-band stray

≤-60dBc

In-band ripple

(fc±3.591MHz)

±0.5dB

Out-of-band rejection

≤-65dBc

Input

Frequency range

470MHz~806MHz (any 100MHz bandwidth)

level

-20±3dBm

Input reflection loss

≥15dB

connector

N-K

Output

Output power

100W

Frequency range

470MHz~806MHz (any 100MHz bandwidth)

Output impedance

50 Ohm

In-band ripple

(fc±3.591MHz)

±0.5dB

Shoulder level

≥40dBatcentral frequency FC±4.2MHz (after correction, single channel)

MER

≥35dB (after correction, single channel)

output reflection loss

≥26dB

Output power variation

±0.25dB

Inner adjacent channel transmission power

Inner adjacent channel transmission power : in-band transmission power≤-60dB,

meet that Inner adjacent channel transmission power≤13mW

External adjacent channel transmission power

External adjacent channel transmission power : in-band transmission power≤-65dB,

meet that Inner adjacent channel transmission power≤13mW

Environment condition

Working temperature

-20~+50C

Storage temperature

-30~+75C

Relatively humidity

<95%(no condensation at 25C)

atm press

86~106kPa

power supply

AC,220V±10%/50Hz

10W-30W

482mmx395mmx132mm

50W-100W

482mmx222mmx564mm

 

Optical Signal Parameters

 

Item

Unit

Technical Specs

Optical wavelength

nm

1100-1600

nominal optical input power

dBm

-1

Input optical power range

dBm

-15~+2

Max input optical power

dBm

+3

Optical interface

FC/APC

optical reflection loss

dB

45³

 

Leave a Reply

1 Response

  1. Ilton Medeiros da Cruz 2017/11/06 at 08:40:43

    Request a quote for a 30 or 50 W Terrestrial Digital TV Transmitter that meets the Brazilian ISDB-T standard