FMUSER 150W FM transmitter with Circularly polarized antenna and 20 meters cable

FMUSER 150W FM transmitter with Circularly polarized antenna and 20 meters cable





Images displayed are taken by FMT-80A(80W), The only difference is the amplifier board.
Check our FME-150A Kit for amplifier board details by item No. 290555149041

Updated on FMT-30A (1U), the latest version (Ver2.1)
Power adjustable: 0-150 watts.
LCD displays working frequency, volume, temperature, forward power, reflected power and SWR,
Single knob operation.
Automatic power control maintaining the output at any preset level
Pre-emphasis optional at 0, 50us or 75us.
Dual stereo audio input interface.
Provided with SWR protection function and temperature protection, raise alarm prompts once meet any trouble while working.
Standard 19 inches, 2U whole aluminum case.
Wiredrawing and oxidation makes surface bright, clean and elegant.

Power supply voltage: 110V or 220V (can be switched)
Power Output: 0 to 150Watt adjustable (step 1W)
Frequency range: 87.5-108 MHz
Frequency Step: 0.1MHZ
Operating Current: Less than 4A
Harmonic suppression: -65 dBc
Operating temperature: -10 ℃ ~ 50 ℃
Frequency stability: ± 10 ppm (-10  ° C to +60 ° C )
Frequency Response: 50 – 15000Hz
SNR: More than 50dB
Distortion: less than 0.5%
Parasitic amplitude modulation: Less than 0.2%
Frequency deviation: Less than ±75KHz
Modulation Mode: WFM
Transmission Signal: FM Stereo or Mono
Tuning Design: Stable PLL Technology
Audio Input Level: -15db Max: -30db
Stereo Separation: More than 40db
Output Impedance: 50 ohm
Audio Input: RCA
AUX Input: BNC
Antenna Connector: N
Unit Size: 483mm * 400mm * 89mm (2U)
Package weight: 8.5Kg


Circularly polarized antenna :




88 -108 MHz continue adjustable for 300W FM TransmitterThe
Frequency Range: 88~108 MHz (According to the scale adjustment)
Impedance: 50
VSWR: <1.5
Gain: Single Bay -3dBd
Polarization:  Circular
Lighting Protection:  Direct Ground
Maximum Power Input-watts : 300 W(Max 500W)MECHANICAL SPECIFICATIONS
Length:   950 mm
Coaxial Cable:  SYV-50-7
Termination:    SL16-J





Now widely used in: 2G/3G cell phone coverage hotels, schools, hotels, railway stations, docks, office buildings, factories, residential quarters and other areas with wlan / wifi signal coverage, various wireless intercom system, short wavelength radio waves various ham frequencies are supported!

The cable supports:
The frequency 0-12G
Note: 1/2 what does it mean?
Is the outer diameter of the metallic shield of the feeder units of inches, regardless of the inner core and coaxial .1 / 2 refers to the outer diameter of the metal shield is 1.27 cm feeder 7/8 refers to the feeder outer diameter of the metallic shield is 2.22 cm, the outer insulation is not including.

Depending on the wireless transmission of electromagnetic waves in the frequency in the feeder, the attenuation of the signal intensity is different. For example: the electromagnetic frequency: 890 — 920M, attenuation at 1/2 feeder is: 7.5 – 7 .7dB/100 meters. 7/8 feeder attenuation of approximately: 4.2 – 4 .5/100 meters.

If you need longer cable, please let me know.

Package includes:
1*150W fm transmitter
1*Circularly polarized antenna
1*20meters cable with connector



Leave a Reply

2 Responses

  1. Dave Schultz 2020/06/21 at 07:35:07

    I would like to inquire about the price of your 150W FM transmitter with the Circularly polarized antenna. Does it come with a power supply and operation manual? Thank you