ProductsSTL studio
Sample/Wholesale
|
Price
|
Shipping
|
Carrier
|
Buy it Now
|
1 pcs sample
|
2735 USD
/pcs |
430 USD
|
DHL/UPS 7-10days
|
|
2 pcs
|
2680 USD
/pcs |
780 USD
|
DHL/UPS 7-10days
|
|
Product Description
STL Transmitter + Receiver + Two Yagi Antenna + 20meters SYV-50-5 Cable + connectors
FMUSER STL10 Studio to Transmitter Link for FM Radio Station Yagi Antenna 20m SYV-50-5 Cable
Background Information: A studio-transmitter link (or STL) sends a radio stations or television station’s audio and video from the broadcast studio to a radio transmitter or television transmitter in another location.This is often necessary because the best locations for an antenna are on top of a mountain, where a much shorter tower is required, but where a studio is completely impractical. Even in flat regions, the center of the station’s allowed coverage area may not be near the studio location or within a populated area where a transmitter would be frowned upon by the community, so the antenna must be placed several miles or kilometers away.Depending on the locations that must be connected, a station may choose either a point to point (PTP) link on another special radio frequency, or a newer all-digital wired link via a dedicated T1 or E1 (or larger-capacity) line. Radio links can also be digital, or the older analog type, or a hybrid of the two. Even on older all-analog systems, multiple audio and data channels can be sent using subcarriers.STL10 Studio to Transmitter Link / Inter-city Relay is VHF / UHF FM communications system providing a high quality broadcast audio channel with variety optional bands. These systems offer greater rejection of interference, superior noise performance, much lowers channel cross-talk, and greater redundancy than currently available composite STL systems. Features*Synthesized from 220 to 260MHz, 300 to 320MHz, 320 to 340MHz,400 to 420MHz and 450 to 490MHz *The transmitted and received frequency can be easily set by digital front panel *Suitable for digital audio. The subsonic over modulation and the low frequency phase distortion are controlled by a feedback circuit in order to exalt the audio quality of the latest digital systems. *Low THD distortion: the THD value with stereo or mono demodulated and deemphasized signals is negligible. *Flat frequency response: due to the latest generation technology and the components precision the flatness of frequency response is absolute. *Low noise: the excellent signal to noise ratio either in mono or in stereo allows the use of this STL¡¯s in multi-hops networks without decreasing the audio quality. *High sensitivity: it allows reducing the STL’s antennas investment. *Great RF immunity: allows operating in most hostile RF environments. *High adjacent channel rejection: obtained thanks to the excellent mechanical shielding and the precision of RF filtering. *High frequency stability with the internal temperature compensated crystal reference. * Integrated LCD Display: complete diagnostic and measurement front panel LCD displays. *Integrated information display and protection controls: for all transmit parameter and protection for malfunction.Technical Specification for transmitter:*Frequency range: 220 to 239.99 MHz , 240 to 259.99 MHz , 300 to 319.99 MHz, 400 to 419.99 MHz , 450 to 469.99 MHz , 470 to 489.99 MHz * Modulation: FM, +-/5 KHz peak deviation *Frequency stability: <+/-100 Hz * RF output power: 0 to 25 W +/-0.5 dB * Max reflected power: 5 W * Harmonic suppression: <-65 dB * RF output impedance: 50 ohm * RF output connector: N Type -female * Audio/MPX input level: -10 to +13 dB @+/-75 KHz deviation * Audio/MPX input impedance: 10 K Ohm *MPX and AUX input connector: BNC-female *Pre-emphasis: 0 / 25/ 50 / 75 us *S/N ratio Mono: >73 dB (20 to 20 KHz) *S/N ratio Stereo: >68 dB (20 to 15 KHz) *Distortion: <0.05% THD @+/-75 KHz dev. <0.2% THD @+/- 150 KHz dev. (limiter threshold > 150 KHz) *Stereo crosstalk: >60 dB (100 to 5 KHz) >50 dB (20 to 15 KHz) int. MPX encoder >60 dB with ext. MPX encoder *Audio channel frequency response: 20 to 15 KHz +/- 0.15 dB *MPX input frequency response: 10 to 100 KHz +/- 0.15 dB *AUX input frequency response: 10 to 100 KHz +/- 0.15 dB *Mains power supply requirements: 90~264VAC; 127~370VDC, Full range universal input *Operating temperature range: -10 to 45 Celsius degrees *Dimensions : 483 x 132.5 x 400 mm, rack std. 19”± 2U *Weight: 6.5 Kg Technical Specification for receiver: * Frequency range: 220 to 239.99 MHz, 240 to 259.99 MHz, 300 to 319.99MHz, 400 to 419.99 MHz, 450 to 469.99 MHz, 470 to 489.99 MHz |
Packages include:
1x STL Transmitter+Receiver
2x Yagi Antenna
2x SYV-50-5 Cable (20m)
Buenas tardes amigos necesito precios de stl,transmisor 3.5 kilowatios fm para venezuela.
good afternnon i am interested to your stl transmitter,how much is that product including transportation cost.
Dear Benny
It is 3165usd for free shipping by DHL to your country .Welcome to bid it.
Sincerely,
lanyue
Does your STL transmitter and receiver work in the 940-960 mhz frequency we use in America? Does it transmit a “composite” signal we need for stereo?
Thanks you.
i need an stl link in the band 360-380 mhz, or in 5ghz band only it be serviceable whether new or used .if available give me a quotation
Dear freind,
you could choose one frequency from 300 to 320MHz, 320 to 340MHz,400 to 420MHz and 450 to 490MHz.
It is new. If you have any question ,pls feel free to contact me :[email protected]
Sincerely,
lanyue