ProductsAudio Amplifier

  • Product Name:

    7-8W FM power amplifier 88-108MHz input 10mW

  • Categories:Audio Amplifier / Other
  • Date:2012-06-29
  • This is the amplifier for the FM transmitter power amplifier As long as the input power of 10MW can be output 7 - 8W Very clean FM signal The circuit uses two power amplifiers, ...
Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
48 USD
/pcs
USD
Airmail 25days

pcs
USD
/pcs
USD
Airmail 25days

Product Description

FM power amplifier 88-108MHz input 10mW output 7–8W

amplifier

 

This is the amplifier for the FM transmitter power amplifier
As long as the input power of 10MW can be output 7 – 8W
Very clean FM signal
The circuit uses two power amplifiers,
Using of winding inductance and improve the circuit Q

Usingof broadband matching circuits
Operating frequency perfect cover 88-108MHZ
Using 12 – 13.8V DC power supply

The circuit is mounted on the aluminum 2MM case, good signal and radio frequency interference shielding, so that your front-end circuit can be good to avoid any interference!

Amplifier output and input are using 50 ohm SMA connectors, power supply through the use of special high-frequency capacitance-core!

 

Note:
* Connect antenna first before connecting transmitter to DC supply, otherwise, transmitter will be burned out.

 

Some instructions on the FM transmitter cover range:

Factors that affect the transmission range is very large,
For example:
1. Transmitter output power. Of course, exactly the same conditions in other cases, the higher the transmission power, the greater the distance fired.
2. Transmitter antenna height. Because the FM band of electromagnetic waves is the approximate straight lines, and its propagation characteristics and light almost. Then obviously, the higher the antenna, transmitter farther.
3. Transmitter antenna gain. The higher the antenna gain, emission will be farther away from
4. Surrounding environment. Have said earlier, FM band and light propagation characteristics of electromagnetic waves similar, so if the transmitting antenna and receiving antenna have a high building block, then the firing range will also suffer greatly.
5. Receiver sensitivity. Receiver sensitivity is low, then high transmitter power and then not help, it is very obvious reason.
6. Electromagnetic environment. If the adverse electromagnetic environment, of course it will cause interference on the receiver, reception it would certainly be affected. As the two people inside the chat in DISCO, it is quite strenuous.

In summary, the rigid target in the general transmitter and did not launch from the index, the distance from the use of the environment is not realistic to talk about the launch.
However, we can press the ideal environment to provide users with reference to consider the distance:
0.5W———— 1000m
2W ———— 2000m
5W ————- 5000m
10W ————– 6500m
15W ————– 8000m
20W ————- 10000m
30W ————- 13000m
50W ————- 15000m
100W ———— 18000m
500W ———— 40000m

Note:
1. The so-called ideal conditions: the transmitting antenna high enough, and no stop between the receiver antenna. Antenna in good working order. Receiver sensitivity of-90dbm above. There is no electromagnetic interference with the environment.
2. Firing range is for reference only and is not a guarantee.

 

 

Leave a Reply