ProductsMixer and audio processor

  • Product Name:

    YAMAHA REV-100 reverb stereo digital reverb

  • Categories:Mixer and audio processor
  • Date:2014-04-18
  • YAMAHA REV-100 reverb stereo digital reverb     Detailed instructions  : A properly installed and connected YAMAHA — REV100. If only a single channel can be accessed by the left channel . INPUT LEVEL: Input Level knob to adjust this ...
Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
350 USD
/pcs
85 USD
DHL/UPS 7-10days

2 pcs
325 USD
/pcs
145 USD
DHL/UPS 7-10days

Product Description

YAMAHA REV-100 reverb stereo digital reverb

rev100effect

revfrontrevbackinfo-rev

 

 

Detailed instructions  :

A properly installed and connected YAMAHA — REV100. If only a single channel can be accessed by the left channel .

INPUT LEVEL: Input Level knob to adjust this so that the peak indicator flashes during normal operation occasionally . Has been shining said signal is too strong, the sound will be clipping, the sound quality is too weak decline will happen , so adjust the input level appropriate first step is to use a good effect , but also a very important step .

MIX BALANCE: the effect of mixing knob is used to adjust the ratio between the sound effects and soundtrack .

PROGRAM: used to select a different program editing program storage.

Second, the effect of changing the program : YAMAHA-REV100 There are 99 kinds of effects of the program, select the up and down cursor keys.

Reverberation

Program  Name  Type  Description

01 Vocal rev1 vocal reverb applied to the human voice

Pre- 02 Vocal rev2 hall on the 3rd extension program , the reverberation time is short

03 Vocal rev3 vocals

04 Room ambience1 plates 04-08 These effects apply to drum and percussion sounds, can act on the entire drum set or a drum sounds

05 Room ambience2 plate

06 Room ambience3 plate

07 Wood booth1 vocals

08 Wood booth2 vocals

09 Acoustic piano plate reverb for piano

10 Club piano hall reverb for piano

11 Booming kick1 hall for the kick drum reverb , emphasizing low frequency

12 Booming kick2 room for the kick drum reverb , emphasizing low frequency

Reverb 13 Loud snare drum room for military

14 Acoustec steel guitar1 plate steel-string acoustic guitar reverb

15 Acoustec steel guitar2 plate steel-string acoustic guitar reverb

16 String plate reverb plate Strings

17 Acoustec gut guitar1 vocals nylon string acoustic guitar reverb

18 Acoustec gut guitar2 vocals nylon string acoustic guitar reverb

19 Btass room1 room reverberation brass

20 Btass room reverberation room brass

Stereo Reverb

Program Name Type Description

21 Large hall1 Hall Stage brighter than the hall reverb

22 Large hall2 Hall Stage brighter than the hall reverb

23 Stage1 hall Stage brighter than the hall reverb

24 Stage2 Hall Stage brighter than the hall reverb

25 Chamger1 human voice simulation of large rooms , high ceilings and reverb

26 Chamger2 hall simulation of large rooms , high ceilings and reverb

27 Church1 room simulation of large rooms , high ceilings and reverb

28 Church2 hall simulation of large rooms , high ceilings and reverb

29 Old gunnel long channel analog hall reverb , old dark , new and bright

30 New tunnel vocals

31 Large room1 room reverberation room , 32 more than 31 low-frequency

32 Large room2 room

33 Slide reverb reverb sound image in the right room

34 Huge room1 room more powerful than the room reverb reverb

35 Huge room2 room more powerful than the room reverb reverb

36 Bathroom stereo plate reverb short

Large plate reverb 37 String ensemble for Strings

38 Rude reverb1 rough vocal reverb

39 Rude reverb2 rough vocal reverb

Reverb 40 Comcert grand piano for the original piano vocal

Gate Reverb

Program  Nam e Type  Description

41 Small ambience1 small hall reverberation room reflections , less than 41 LF 42

42 Small ambience2 hall

43 Tight poom1 room smaller than the above two effects reverb

44 Tight poom smaller than two Hall effect at the reverb

45 Gate reverb1 plate reverb various doors

46 Gate reverb2 vocal reverb various doors

47 Gate reverb3 hall reverb various doors

48 Gate reverb4 hall reverb various doors

49 Stone room stone room reverberation room

50 Big curve longest gate reverb vocals

Delay

Program  Name  Description

51 Analog delay1 soft delay

52 Ping pong delay panning left and right delay changes

53 Eighth note triplet as eight points triplet delay

54 Karaoke Echo effect for karaoke OK

55 Short delay doubler a short delay

56 Stereo long delay left stereo channel with long delay

57 Sgereo medium delay unequal left and right channel stereo delay

58 Stereo long delay left and right with a long short delay

Repeat delay 59 Mono long delay mono output

Repeat delay 60 Mono short delay mono output

Delay / reverb

Program Name Type Description

61 Electric piano delay + hall often used for piano

62 String pad delay hall often used for background music

63 Synth Strings delay for background vocals

64 Vocal1 64,65 short delay is long reverb for vocals

65 Vocal2 64,65 hall is a short delay the long delay reverb for vocals

66 Vocal3 Room 66 is a short delay delay reverb stressed

67 Btinght vocal delay plate reverb with bright small delay

68 Chorus delay + reverb plate half and half delay

69 Drum kit1 room for delay + reverb drums and percussion

70 Drum kit2 delay plate reverb for drums and percussion

 

 

Reverb / modulation

Program Name Type Description

71 Soft flange1 hall + erratic This effect combines a small pitch change reverb and erratic , commonly used in the synthesis of the background music sounds

 

72 Soft flange2 hall + erratic This effect combines a small pitch change reverb and erratic , commonly used in the synthesis of the background music sounds

73 Amgience flange1 room reverb and erratic erratic short

74 Amgience flange2 room reverb and erratic erratic short

75 Soft reverb flange short reverberation room plus more erratic erratic pitch change

76 Organ cabinet1 dish erratic erratic results for organ

Uncertain effect 77 Organ cabinet2 room for Organ Symphony

78 Symphonic reverb1 + symphonic hall mainly fine with reverb effects

79 Symphonic reverb2 vocals + symphonic effect with reverb -based fine

80 Flange room1 room + erratic as drums and percussion plus special effects

81 Flange room2 room + erratic as drums and percussion plus special effects

82 Rolling flange1 plate + erratic as drums and percussion plus special effects

83 Rolling flange2 plate + erratic as drums and percussion plus special effects

84 Big flange erratic Jets vocal effects

85 Chorus rererb1 hall + 85,86 ordinary chorus Reverb + Chorus , is widely used as a piano

86 Chorus reverb2 plate + Chorus

87 Chorus reverb3 hall + and sing

88 Chorus reverb4 Vocal + Choir

89 Tremolo reverb1 hall + tremolo tremolo + reverb effect various changes

90 Tremolo reverb2 hall tremolo tremolo + reverb effect various changes

91 Tremolo reverb3 plate + tremolo tremolo + reverb effect various changes

92 Tremolo reverb4 vocals + tremolo tremolo + reverb effect various changes

93 Tremolo effect various changes reverb5 vocals + tremolo tremolo + reverb

94 Tremolo reverb6 hall + tremolo tremolo + reverb effect various changes

95 Tremolo reverb7 hall + tremolo tremolo + reverb effect various changes

96 Ambient slow pan1 hall + tremolo pan about change and short reverberation

97 Ambient slow pan2 panning around the room + tremolo changes and short reverberation

98 Sequence pan1 room + tremolo from the song on the speed of sound image change effect

99 Sequence pan2 room + tremolo from the song on the speed of sound image change effect

Edit mode (Edit Mode)

Each effect has multiple parameters are REV100 , three main parameters can be controlled by the knob on the front panel .

Editing effects program

1 , press the down cursor key until the program to be edited is displayed on the screen.

2 Select a knob , such as DELAY ( delay ), DECAY ( feedback ), LEVEL ( level ) .

3 , turn the knob to change the parameter values ​​displayed on the screen , when the same value and the preset value , the knob indicator lights.

4 , monitor the effect of the adjustment

The following table lists the available parameters knob edit:

Effect type DELAY DECAY LEVEL

01-20 reverb pre delay ( in milliseconds ) reverberation time (× 0.1 ms ) effect level

21-40 stereo reverb pre- delay ( in milliseconds ) reverberation time (× 0.1 ms ) effect level

41-50 door reverb pre delay ( in milliseconds ) the noise level gate-level results

51-60 Delay Delay time (× 10 ms ) feedback level effect level

61-70 delay / reverb delay time (× 10 ms ) feedback level Reverb Level

71-99 reverb / modulation modulation depth of modulation speed Reverb Level

Storage effect program

1 Press STORE button , the program number flashes on the screen .

2 , press the STORE button to execute stored , you can not choose the other changes made to the program number is stored here .

Initialization REV100

You can 1 – 99 effect programs ( one or all ) to restore the factory settings.

1 , hold down the STORE button and turn on the power .

2 , choose to initialize the program number with the cursor keys , ” – ” indicates that all programs will be initialized.

3 Press STORE key to execute .

 

YAMAHA REV 100 digital reverb REV100 for the high quality, low price , easy to use stereo reverb . Can be used for indoor recording and sound reinforcement . Has two input and output stereo interface. At the same time produces high-quality stereo reverb and delay effects can also be produced and modulation effects plus reverb sound. 16 -digit analog -digital and digital -quality sound to ensure the large frequency response range. With a sampling rate of 44.1kHz .

REV100 can be controlled by turning the knob to set the parameters and edit the desired effect. MIDI IN connector allows the effect of the program to be selected via MIDI information .

 

Front panel :

1, input level control INPUT LEVEL: to turn the knob , you can set the input level. Set level, should be the peak PEAK indicator lights occasionally flashing as appropriate.

2 , the peak around indicator PEAK: light-emitting diode , when the unit receives the signal level to produce a peak signal is lit .

3, the direct sound / effect sound mixing balance control DRY / WETMIX BALANCE: Turn the knob to control the direct sound and effect sound signals each ratio.

4, the light-emitting diode seven segment display : the way the program can display the current program number : Display mode when editing a parameter value: MIDI number displayed in the MIDI mode ; When you select a MIDI program change table , MIDI display lights ; when when you select the internal procedures , INT internal display lights.

5 , the program key PROGRAM ( up and down arrow keys , MIDI key , STORE Save button ) : These keys are used to select a different program to edit MIDI program change table , and save the adjustment procedure.

6, the edit control EDIT ( delay DELAY, DECAY decay , LEVEL level ) : To turn the control knob to control the parameter values ​​of the currently selected effect . When the parameter values ​​are edited with the program previously stored in the same, the left side of the display will light . See “Program Edit” one .

7, Power Shape: Press the power switch is turned on , the power supply is disconnected and then press.

 

After the disk:

1 , DC 12V input DC12V IN: power output connected to AC transformer , the local power supply.

2 , the interface MIDI IN: MIDI data to enable the machine to receive a signal .

3, the output interface QUTPUT: To 1/4in pickup interfaces , the machine can output audio signal processing , if you use a single sound, the interface can only access one .

4, the input interface INPUT: 1/4in pickup for the interface used to access the audio signal processing effects . Mono , just left L-MONO access to interface signals .

 

Instructions to change the program :

By then the arrow keys to select the number of different levels , a total of 99 programs to choose from.

No. Name Type introduce reverberation

01 vocal reverb vocals suited to be a vocal effects processing

02 Hall 2 vocal reverb pre-delay time longer reverberation time is short

03 3 vocal reverb vocal pre-delay time longer reverberation time is short

04 room environment a flat drum is mainly used for effect, you can use them on the snare drum , bass drum and other drums effect control is performed , you can control the entire drum part can also control individual drum unit

05 rooms Environment 2 plane

06 3 room flat environment

07 Ibid wooden chamber a human voice

08 Ibid wood room 2 voices

09 classical piano classical piano vocal reverb plane

10 Ibid club piano hall

11 Long rang a hall reverb bass drum , increasing the low-frequency part of the

12 Ibid Long rang two rooms

13 snare drum sound loudness of the snare drum room reverb

14 classical metal guitar a flat metal strings classical guitar reverb

15 Ibid classical metal guitar 2 plane

16 chord Plane mainly for Strings

17 classical non-metallic nylon string acoustic guitar and one classical string

18 classical guitar 2 vocals Ditto nonmetallic

19 music rooms 1 room high brightness , short tube reverb reverb music section

20 Fun Room 2 Room Ditto stereo reverb

21 Hall 1 Hall of Hall class reverb, mixed proscenium loud in the lobby section

22 Ibid Hall 1 Hall

23 Ibid proscenium Hall 1

24 Ibid proscenium two voices

Room 25, a human voice sound environment for a large room with a high ceiling

Room 26 2 Ibid vocals

27 Ibid church a room

28 Ibid Church Hall 2

29 vintage pipe hall reverberation in a long pipe , when vintage reverb dark , when mixed with the new loud

30 new pipeline vocals

31 large rooms one room excitation class room , the effect is less than the range of 32 31 results

32 large rooms 2 rooms

33 sliding sound reverberation room reverb sound to locate on the right

34 large rooms one room class room reverb heavy rain dynamic range

35 Ibid large room 2 rooms

36 bathrooms flat stereo delay short

37 Strings group plane spacious reverb , suitable for Strings

38 coarse rough vocal reverb reverb 1

39 Ibid rough vocal reverb 2

40 piano concert hall suitable for classical piano vocal reverb plus door

41 small environment a hall imitate a small reflection room , the low-frequency portion of the effect is less than 42 41 results

42 small environment Hall 2

43 tight less than 1 Rooms mimic a “small environment” reverb room

44 Ibid 45 tight room 2 hall door plus reverb reverb a plane door

46 plus 2 door reverb vocals ditto

47 Ibid plus door hall reverb 3

48 plus door hall reverb 4 Ibid.

49 stone to imitate a stone room room reverberation room

50 ceremony informant door reverb sound in Canada , and its longest delay reverb effect

51 analog delay a soft tone delay

52 Ping-Pong Delay Delay effect in the left and right to change the sound and

53 8 triplets as ping-pong delay effect , the effect is like eight triplets

54 Kara Kara OK OK suited for delay

55 short delay to repeat a short time delay

56 stereo channel delay of about the same length of time delay stereo delay

57 left and right channel stereo delay time delay different stereo delay

58 -channel stereo short delay of about the same delay time

59 mono mono output long delay repeat delay

60 Ibid mono short delay

61 electric piano electronic piano for the delay plus hall

62 String pad delay to the music hall for electric mat class

63 synthetic delay to the human voice is suitable for mat class String

64 people to the human voice sound a delayed effect , and 64 prefabricated 65 reverb effects are a tight long delay for a human voice , reverb effects , 66 prefabricated short delay increased

65 second delay to the vocal lobby

66 vocal delay plus room 3

67 bright bright vocal reverb delay to the plane , with a slight delay

68 Chorus delay plus reverbs each half plane delay

69 Drum 1 Drum unit delay plus room environmental effects

70 drum 2 is delayed until the plane Ditto Reverb / modulation effects

71 soft trim trim will add a lobby with a small pitch trim change , reverb combination pad suitable class of synthetic sounds

72 Hall 2 plus soft trim trim

73 environment room to trim trim trim a short reverb effect added

74 environment room to trim trim 2 Ditto

75 short reverberation room to trim trim trim and short reverberation adding large pitch change effect

76 organ chamber a plane to trim flanger effect suitable for organ sounds

77 Organ Room 2 hall to euphony ditto

78 homophonic homophonic based reverb plus a hall reverb sound effects

79 plus homophonic homophonic vocal reverb 2 Ditto

80 chrome trim room a voice to these effects will do special effects processing drum unit

2 room flat plus 81 chrome trim ditto

82 plus trim scroll trim a plane above, but greater degree of effect

83 scroll trim two flat plus trim ditto

84 large chrome trim jets plus vocal effects

85 Chorus Reverb plus a chorus of prefabricated halls 85 and 86 as normal chorus / reverb effects , as on many occasions , such as electric piano effect

86 Chorus Reverb plus Chorus 2 plane

87 chorus reverb and chorus Hall 3 Ditto

88 plus chorus vocal chorus reverb 4 Ibid.

89 plus vibrato tremolo hall reverb with a vibrato effect to the modulation effect in sound

90 2 room reverb vibrato to vibrato ditto

91 3 plane plus reverb tremolo vibrato ditto

92 plus tremolo vibrato vocal reverb 4 Ibid.

93 plus tremolo vibrato vocal reverb 5 Ditto

94 plus vibrato tremolo hall reverb 6 Ibid

95 plus vibrato tremolo hall reverb 7 Ibid

96 Environmental slow vibrato sound added to a hall reverb and produce a short sound effect sound to the left and right

97 Environmental slow vibrato sound to two rooms plus ditto

98 order to a room plus sound you can add vibrato to the sound effects to a song , its speed is around 120 , adjustable

Order of 99 to 2 rooms plus vibrato sound

 

 

Editing

 

RV100 has the effect of some parameters , the most effective of which three parameters can be used for simple rotating knob , an editing program .

1 , press the down arrow key to make the desired program number displayed on the block ;

2 , select an editing controller , such as turning the control knob DELAY delay ;

3 , turn the control knob , the figures in the corresponding segment digital display block changes , changes in the value of the anti- back when the original set of values ​​of this parameter , the display next to the bright lights of this control ;

4 , listen to effect an edited .

 

Premarket following table provides you with the serial number control parameter values

Effect Type

Delay DELAY DECAY attenuation level LEVEL 1 ~ 20 reverb pre-delay (ms) reverberation time * 0.1S effect level of 21 to 40 stereo reverb pre-delay (ms) reverberation time * 0.1S effect level from 41 to 50 plus gate reverb pre-delay (ms) the effect of noise gate level 51 to level 60 delay delay time (* 11ms) feedback effect level 61 to level 70 delay / reverb delay time (* 12ms) reverb feedback level level 71 ~ 99 reverb / modulation depth of modulation modulation speed of a program to save the reverb level

 

1 Press STORE ( store ) button , the program number will flash on the display block ;

2 , then press Save to confirm the action , you can save it. Note : In the second step before you can select a different program number for storage.

 

You can set the initialization function to initialize the machine program from 1 to 99 , or one single program reset to factory default values ​​go up .

1 Press STORE ( store ) key, turn on the power ; 2 , press the down arrow key to select the beginning of a single program , For All program initialization, press the up or down arrow key until a display block shows ” – ” button ; 3 , click the sTORE ( store ) button , then complete the initialization .

 

MIDI mode : The machine ‘s MIDI IN connector allows the machine via MIDI signal to the selection process . MIDI program change table : This machine has a program to change the menu functions , so that you can reinstall the program sequence effects via MIDI program change number to choose . You can set up a program to watch it with MIDI program change number from 1 to 99 correspond. When the unit receives a MIDI program change message , it will be according to their internal procedures and the number corresponding to the information corresponding to the selected MIDI internal procedures . The machine will not recognize more than equal to 100 MIDI program change number.

 

Set MIDI program change table :

1 , press the MIDI button , MIDI display lights on the seven-segment display next to the code , display lights when MIDI , seven blocks on the digital display shows the current MIDI program change number ;

2 , select another MIDI program change number, use the arrow keys ;

3 , the choice of an internal program number , press the key MIDI , MIDI display lights off while the internal display lights ;

4 , press the up and down arrow keys to adjust the internal program number to the desired MIDI program change ;

5 , when you exit this mode , press the MIDI key for about one second , then the MIDI indicator lights , INT internal display lights are put out , the display shows the current program block number .

 

Setting the MIDI receive channel : By default, the machine is set to receive MIDI channel OMNI all the way , you can change this way, set a different receiver channel .

1 , press and hold the key to open the MIDI machine , the display on the block that is currently selected MIDI channel ;

2 , press the down arrow to select MIDI channels , AL when OMNI all the way , from 1 to 16 are shown each of the independent channels ;

3 , press the MIDI button to return to normal operation.

Leave a Reply

3 Responses

  1. Narendra 2016/03/08 at 12:15:17

    plz REV100 yamaha my mobile no 9829751630

  2. Kamlesh patel 2017/01/20 at 13:13:35

    Hi there
    I want to buy it Yamaha rev100 digital effect made in Japan so it’s you have a in tha stock? Replay me plz

  3. HARPAL SINGH 2018/10/09 at 10:50:20

    GOOD EVENING SIR I AM DEALER AND SUPLIER AHUJA STUDIOMASTER SHURE PIONNER SONY JBL RCF BOSS ETC AND I WANT PARCHESE NEW AND USED REV 100 YAMAHA FOR JAPAN THEREFORE PLEASE GIVE ME REV 100 YAMAHA WHOLESALE PRICE PLEASE HELP ME