FMUSER FSN5 300w 350w FM transmitter Radio Broadcast FM Radio Station Cover Far With CP100 Circularly polarized FM antenna 30m cable kit

Product Description

FMUSER 300w 350w FM transmitter Radio Broadcast FM Radio Station Cover Far With CP100

Circularly polarized FM antenna 30m cable kit

FREQUENTLY APPLICABLE USES:

1). Community Radio stations

2). LPFM radio stations
3). City radio stations

4). Christian Church radio stations

OUTSTANDING FEATURES:

1) OVERHEAT PROTECTION:

The transmitter will switch to auto-protection with alarm message and a beep sound once the working temperature gets higher than normal range.

2) OVER SWR PROTECTION:

SWR is the indication of antenna system connection with transmitter. Once the connection is bad and causing a high SWR Value, the transmitter will switch to automatic protection mode by showing alarm message on the screen with a beeping sound meanwhile.

3) FAN ERROR ALARM

When the fan stopped running, there will be alarming message showing on the screen like the following:

4) FREQUENCY AUTO MATCHING:
The 1kw FM transmitter auto scans the best matching frequency on antenna to maximize the broadcasting efficiency at minimum SWR ratio, this ensures the best performance from both the transmitter and antenna.

5) MODULATION ADJUSTABLE:

When audio mixers are connected with the 1kw FM transmitter through the XLR Balanced audio input interface, the transmitter will provide plenty of options for the modulation to best match with the mixer.

6) ONE TOUCH OPERATION:

This FSN-1000T 1kw FM transmitter is designed with a precisely sensitive touch screen in replace of the control buttons on previous transmitters. With all information displayed clearly on the screen, users can control and configure all parameters very easily.

7) FLEXIBLE AUDIO OPTIONS
The pre-emphasis of 1kw FM transmitter are flexible to choose among 0US / 50US/ 75US, users can choose the best match mode according to their own needs.

8) ADJUSTABLE POWER OUTPUT
The RF out of this 1kw FM transmitter is continuously adjustable from 0-1000 watt at the stepping of 0.1watt, which means you can tune it to 1w, 1.1w, 1.2w…50w…100w…500w…1000w, with just one transmitter you’ll get multiple modes of outputs and easy to tune as per your needs.

9) LONG COVERING RADIUS

9) LONG COVERING RADIUS

TECHNICAL SPECIFICATION:

RF Part:

Frequency: 87.5-108MHz,
Frequency step value: 10KHz

Modulation: FM, peak deviation ± 75KHz
Frequency stability: <± 100Hz
Frequency stabilization method: PLL frequency synthesizer
RF output power: 0~350 watts ± 0.5dB
Residual wave: <- 70dB
Higher harmonics: <- 65dB
Parasitic AM: <- 50dB
RF output impedance: 50Ω

RF output connector:N female

Audio Part:
Audio input connector: XLR female
AUX input connector: BNC female

Pre-emphasis: 0us, 50us, 75us (user setting)
S / N ratio mono:> 70 dB (20 to 20KHz)
S / N ratio stereo:> 65 dB (20 to 15KHz)
Stereo resolution: -50dB
Audio frequency response: 30 ~ 15000Hz
Audio distortion: <0.3%
Audio level gain: -12dB ~ 12dB step 3dB

Audio input: -19dB ~ 5dB

General Features:
Power supply voltage range: 110V ~ 260V
Operating temperature range: -10 to 45 ℃
Work mode: continuous work
Cooling method: air cooling
Cooling efficiency: <95%
Work Altitude: <4500M
Power consumption: 1500VA
Dimensions: 483 x 320 x 88 mm without handles and protrusions, 19 “2U standard rack.
Weight: 10Kg

Circularly polarized antenna :

88 -108 MHz continue adjustable for 300W FM Transmitter

The ELECTRICAL SPECIFICATIONS
Frequency Range: 88~108 MHz (According to the scale adjustment)
Impedance: 50
VSWR: <1.5
Gain: Single Bay -3dBd
Polarization:  Circular
Lighting Protection:  Direct Ground
Maximum Power Input-watts : 300 W（Max 500W）MECHANICAL SPECIFICATIONS
Length:   950 mm
Coaxial Cable:  SYV-50-7
Termination:    SL16-J

Cable:

Now widely used in: 2G/3G cell phone coverage hotels, schools, hotels, railway stations, docks, office buildings, factories, residential quarters and other areas with wlan / wifi signal coverage, various wireless intercom system, short wavelength radio waves various ham frequencies are supported!

The cable supports:
The frequency 0-12G
Note: 1/2 what does it mean?
Is the outer diameter of the metallic shield of the feeder units of inches, regardless of the inner core and coaxial .1 / 2 refers to the outer diameter of the metal shield is 1.27 cm feeder 7/8 refers to the feeder outer diameter of the metallic shield is 2.22 cm, the outer insulation is not including.

Depending on the wireless transmission of electromagnetic waves in the frequency in the feeder, the attenuation of the signal intensity is different. For example: the electromagnetic frequency: 890 — 920M, attenuation at 1/2 feeder is: 7.5 – 7 .7dB/100 meters. 7/8 feeder attenuation of approximately: 4.2 – 4 .5/100 meters.

If you need longer cable, please let me know.

Package includes:
1*350W fm transmitter
1*Circularly polarized antenna
1*30meters cable with connector