0 ~ 30W adjustable power
Dual microphone inputs Reverb
External encoder input (for external SCA or RDS encoder)
VSWR protection, and can set the start value of the standing wave protection.
over-temperature protection, and can set the start value over temperature protection.
controlled fan forced cooling system to ensure stability while the machine can also increase the working life of the fan.
automatic volume control function. Input volume can be detected automatically adjusted, to ensure the best modulation.
four commonly used function keys. Can be quickly set the parameters of the machine.
Power supply voltage: AC100V ~ 240V/50Hz/60Hz
Working frequency: 87 ~ 108MHz (can be customized 76 ~ 92MHz)
Frequency stabilization mode: PLL Frequency Synthesizer (PLL)
Frequency Step: 0.1MHz
RF power: 0 ~ 30W adjustable. Maximum 30W
RF output impedance: 50Ω / Coaxial
stray radiation: <-60db
audio level: 15dbV
Frequency response: 50 ~ 15KHz
signal to noise ratio: 70db
ambient temperature: 0 ~ 45 ℃
ensure compliance with the requirements of the antenna or radio frequency load reliably connected to the transmitter.
ensure that the supply voltage within the allowable range.
ensure that the air inlet and fan ventilation.
Length : 950 mm
Coaxial Cable : SYV-50-7
Termination : SL16-J
Why do we recommend this dipole antenna?
1).The half-wave dipole is very clear and easy for frequency adjustation, there are scales on the side bar of the antenna from which you can adjust the frequency from 88~108 by 1mhz stepping.
2).The dipole is a simple antenna to construct and use, and many of the calculations are quite straightforward.