Input:ASI, CVBS, YPbPr, SDI, HDMI, RCA, XLR, AES  Output:IP-MPTS, IP-SPTS, ASI  Inner Function:Multiplexer  Power:

Outline

NDS3211A MPEG-2/H.264 HD Encoder is the new broadcasting audio & video encoding and multiplexing device with powerful functionality. It is equipped with multiple video input interfaces (SDI, CVBS, YPbPr and HDMI) and audio input interfaces (AES, RCA and XLR). It supports both MPEG-2 and MPEG-4 AVC/H.264 video encoding and MPEG1 Layer II, HE-AAC and LC-AAC audio encoding. Multiplexing function is also embedded to select the input programs and output stream through ASI/IP port in the same time.

Key Features

• • MPEG-2 HD/SD and MPEG-4 AVC/H.264 HD/SD video encoding
  • Support 720P, 1080I, 480I, 576I and various PIP video resolution
  • MPEG1 Layer II, HE-AAC (v1&v2) and LC-AAC audio encoding
  • Support 2 stereo or 4 Mono audio encoding
  • Support AC3 pass through (for SDI in only)
  • Support digital video + analog audio input and encode
  • Support CC (closed caption), EIA 608 and EIA 708 (for SDI in only)
  • Applicable for one Seg/ISDB-T utilization
  • IP (MPTS/8*SPTS) Output; ASI Output
  • Support UDP/RTP media transmission protocols & multicast/unicast output
  • LCD / keyboard control and web management

Blocks Diagram

Specifications:

4:2:2 (Applied to all resolution under MPEG2 compression)

Advanced Pretreatment

De-interlacing, noise reduction, sharpening

Video (one-seg)

Resolution

96×96, 128×96, 128×128, 192×192, 352×240, 352×288, 416×240

Encoding

MPEG-2; H.264; Auto (follow the main stream format: MPEG-2 or H.264)

Bit-rate

0-1.0 Mbps

Aspect Ratio

4:3; 16:9; Auto (follow the main stream)

Audio

Encoding

MPEG-1 Layer II, HE-AAC (v1&v2), LC-AAC

AC3 Passthrough (for SDI in only)

Sampling rate

48KHz

Resolution

24-bit

Bit-rate

32Kbps~384Kbps

Multiplexing

1 ASI input multiplexed with local 1 channels TS

Delay

1400ms – 5000ms

Stream output

2×ASI output ports, BNC interfaceMPTS/8*SPTS over UDP/RTP, 10/100 Base-T Ethernet interface (UDP/RTP multicast/unicast)

System function

LCD/keyboard and web managementLanguage: EnglishEthernet software upgrade

General

Dimensions

482mm×405mm×44.5mm (W × D × H)

Approx weight

4.5Kg

Temperature

0~45℃(Operation), -20~80℃(Storage)

Power requirement

AC110V±10%, 50/60Hz

AC 220V±10%,50/60Hz

Power consumption

21W

Appearance and Description

Front Panel Illustration

Rear Panel Illustration

① SDI input connector

② YPbPr & CVBS input connectors

③ AES, RCA and XLR input connectors

④ HDMI input connector

⑤ ASI input connector

⑥ NMS connector for connecting Web management on PC

⑦ DATA Port (not applicable currently)

⑧ DATA Port for IP stream output

⑨ ASI output connectors

⑩ Power supply/Fuse

⑪ Grounding

Network Management System

User can not only use front panel to set configuration, but also control and set the configuration with a PC (Personal Computer) by connecting the device to web NMS Port. User should ensure that the computer’s IP address is different from the FUTV4311A’s IP address; otherwise, it would cause IP conflict.

Packing List