Manual download

Fmuser-CZH-CZE-7C Transmitter User Manual

Leave a Reply

7 Responses

  1. Judy Lamoste 2017/02/05 at 09:00:11

    hello, this is Judy from Philippines we purchased an FMuser FU-7C and we would like to see its manual. Thankyou

  2. ashok gavankar 2017/11/21 at 16:13:06

    to download user manuel

  3. Al Grelley 2020/06/30 at 01:26:24

    I own a CZE-7C what components do I need to change out to operate a 75 us premphasis

  4. Liam Harkin 2020/08/25 at 16:32:24

    my fan on my 1w/7w 76-108mhz transmitter has stopped working it’s only new three days old. Why would it stop.

  5. Cw 2020/08/27 at 23:05:18

    Hi,
    I. Bought what I believe is a CZE7C 1Watt /7Watt transmitter.
    Can I get a schematic so I can try and drop the output power?

    Its way too high for legal use here in the USA and I don’t want to put a bunch of attenuators on the output.

    Thanks in advance,

    CW

    • admin 2020/08/28 at 01:55:41

      CZH-5C/7C power conversion method:
      1, to determine the power supply is not connected;
      2, hold down the left key to open just let go;
      3, then access to power (to ensure DC12V 2A above)
      4, the screen displays H or L, then let go
      5, according to demand, through the (H), lower (L) key cut H / L file
      6, selected, press the left key to confirm the open, the screen display 108, indicating the success of the power conversion settings file, has entered the high-frequency setting;
      7, through the upper and lower buttons to set the work of most high-end frequency of the transmitter;
      8, then open the key, the screen display 76 to indicate the success of high-frequency setting, has entered the low-frequency set
      9, through the upper and lower buttons to set the work of the most low-end frequency of the transmitter;
      10, open the key, the screen display OFF, meaning that all set up, has set out the background;
      11, open the key, set the transmitter to enter the normal working state;

  6. Roxann 2020/12/09 at 20:21:11

    How do you unmute the transmitter? When I first turn it on, it’s muted and I don’t know how to fix this.